your motor warns you before it burns out.
We read the current of your compressors, motors and pumps to anticipate failure 1-2 weeks before the operation stops. And we break your bill down by circuit so there is no phantom load and no end-of-month surprises.
A current meter learns the normal pattern of each compressor, motor or pump and detects the drift that anticipates a mechanical failure 7-14 days ahead.
We cross compressor current with temperature: it tells a normal defrost from a real failure and alerts the moment the compressor drops, not once the temperature has already risen.
A multi-channel meter at the panel breaks down consumption by area —refrigeration, lighting, HVAC, cooking— so you know exactly where the power goes.
They catch the phantom load of equipment running 24/7 with an empty office, and cut it on a schedule without you moving a cable.
A current meter plus an ultrasonic level sensor confirm the generator starts and has enough diesel — before the power goes out, not during.
Equipment that fails with no warning costs more than the repair: it costs the stoppage, the product and the emergency. This is what current catches before it happens:
Energy runs through almost any operation with critical electrical equipment or a bill that hurts. These use it most:
Six energy and electrical recipes ready to deploy: predictive maintenance for compressors and motors, current + temperature correlation, per-circuit submetering, smart plugs and stand-by generator. Each is a specific meter + calibrated baseline + alert route + report, all pre-built. You install only those that apply to your operation.
Let’s design the recipes for your critical equipment together — from the compressor to the generator.